How to install chip for W1340/W1350/W1360 series
Scissor Chip recycle drill tweezers
1:Pull out the chip recycle drill screw and install it on the OEM toner cartridge.
2:Rotate the chip chip recycle drill screw to the bottom to extrude the chip.
3:Remove the recovery drill screw and then take out the chip.
Scissor the unnecessary plastics around the chip and on the back of the chip.
4:Use cutting pliers to evenly trim the protruding plastic blocks around the chip and at the bottom.
5:Install the chip leaningly into the new toner cartridge as below correct direction.