Tools included

Chip/Tweezer

1:Turn the chip collector's handle counterclockwise.

2:Pull the cutter to the right until the chip slot of chip collector can be seen.

3:Make sure the chip collector's chip slot fits in HP original cartridge's chip slot as the video shown.

4:Snap the chip collector into place.

5:Turn the handle clockwise until the chip is removed by the cutter. 

6:Use tweezers to take the chip out of the HP cartridge.

7:Again, turn the handle counterclockwise, pull the cutter to the right and take the chip collector out of the HP cartridge

8:Use the sandpaper on the chip collector to remove chip's glue.

9:Position the chip as the video shown, then install it into the compatible cartridge's chip slot.