Tools included

Chip/Tweezer

1:Turn the chip collector's handle counterclockwise.

2:Pull the cutter to the right until the chip slot of chip collector can be seen.

3:"Snap" the chip collector into place.

4:Turn the handle clockwise until the chip is removed from the chip slot by the cutter.

5:Use tweezers to take the chip out of the OEM cartridge.

6:Use the sandpaper on the chip collector to remove chip's adhesive.

7:Use tweezers to position the chip and make sure the chip is placed along the right direction.

8:"Snap" the chip into place.